Samsung DV455GVGSWR-AA - Manual (Page 66)

English - 66
Troubleshooting
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your Dryer.
ERROR DISPLAY MEANING SOLUTION
tE
The thermistor resistance is very
low or high. Clean the screen or vent.
If the problem continues, call for service.
tE3
The resistance of the thermistor
for the vent blockage detection is
very low or very high.
Clean the screen or vent
If the problem continues, call for service.
HE
Invalid heating Temp when the
dryer is running.
Call for service.
dE Running the dryer with door open
Clean the door and then restart.
If the problem continues, call for service.
bE2
Invalid state of key. Circuit short
for 30 secs.
Make sure a button is NOT being pressed
continuously. Try restarting the cycle.
If the problem continue, call for service.
FE Invalid power source frequency
Try restarting the cycle.
If the problem continues, call for service.
2E
Electronic Control Problem
(Over Voltage Error)
Call for service.
AE
Electronic Control Problem
(Communication Error)
Call for service.
Et
Invalid state of Eeprom
communication
Call for service.
AE4
A communication error between
the Wi-Fi PBA and the MAIN PBA
Call customer service.
AE3
A A communication error between
the DR Modem and the MAIN
PBA
Call customer service.
AE5
A A communication error between
the LCD PBA and the MAIN PBA
Call customer service.
dF
Invalid door state for more than
256 milliseconds.
Call for service.
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
DV455_02836F-08_EN.indd Sec6:66 DV455_02836F-08_EN.indd Sec6:66 2013-12-12 5:12:13 2013-12-12 5:12:13