Caution, Setting up the refrigerator – Samsung RS25H5000SR-AA User Manual

Page 10

Advertising
background image

English - 10

CAUTION

When installing, servicing or cleaning behind the

refrigerator, be sure to pull the unit straight out and

push back in straight after finishing.

First things first! Make sure that you can easily

move your refrigerator to its final location by

measuring doorways (both width and height),

thresholds, ceilings, stairways, etc.

The following chart details the exact height and

depth.

Dimensions [inch (mm)]

Model

RS25H5121** RS25H5111**

Width

Only Cabinet

908 (35 3/4)

With Leg Front

914.4 (36)

Depth

Only Cabinet

763.3 (30 1/16)

With Door

875 (34 1/16)

With Handle

940 (37)

90° Open

F 1,173 (46 2/11) /

R 1,288 (50 17/24)

135° Open

F 1,018 (40 3/38) /

R 1,109 (43 43/65)

Height

Only Cabinet

1,740 (68 1/2)

With Hinge

1,760 (69 9/32)

With Door

1,775 (69 7/8)

• Allow clearance to the right, left, back

and top when installing.

This will help reduce power consumption

and keep your energy bills lower.

• Make sure you disconnect the water supply line

BEFORE removing the freezer door.

To avoid damage, refer to ‘Separating the

water line from the refrigerator’ in the manual

SETTING UP THE REFRIGERATOR

Now that you have your new Refrigerator installed

in place, you are ready to set up and enjoy the

features and functions of the appliance.

By completing the following steps, your

Refrigerator should be fully operational.

If not, first check the power supply and electricity

source or try the troubleshooting section at the

back of this user’s guide.

If you have any further questions, contact your

Samsung Electronics service center.

1. Place the Refrigerator in an appropriate location

with reasonable clearance between the wall

and the Refrigerator.

Refer to installation instructions in this manual.

2. Once the Refrigerator is plugged in, make sure

the interior light comes on when you open the

doors.

3. Set the Temperature control to the coldest

temperature and wait for an hour.

The Freezer will get slightly chilled and the

motor will run smoothly.

4. After powering the Refrigerator, it will take a few

hours to reach the appropriate temperature.

You can store food and drinks in the

Refrigerator after the temperature is sufficiently

cool.

5. Assemble the water line to the refrigerator and

verify that the couplers are correctly assembled

without water leakage.

(Refer to ‘Installing the water line’, page 16)

SSEDA-14 (RS25H5121)

.indd 10

2013. 11. 28. 11:28

Advertising