Samsung RS25H5000SR-AA - Manual (Page 12)

English - 12
Separating the water supply line from
the refrigerator
1. Remove two water lines by pressing the
coupler ( 1 ) and pulling the water line ( 2 )
away.
(1)
(2)
CAUTION
Make sure the color of the water lines match.
Reattaching the Water Supply Line
1. The Water Line must be fully Inserted to the
center of transparent coupler to prevent water
leakage from the dispenser.
2. Insert the 2 clips in the install pack and check
that each clip holds the line firmly.
Center of Transparent coupler
Clip A (1/4”)
(6.35 mm)
Do not cut the water line. Gently separate
it from the coupler.
Removing the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so
the hinges are not bent or broken.
• Be careful not to pinch the water tubing and
wire harness on the door.
• Place doors on a protected surface to prevent
scratching or damage.
• Is necesary two people for disassembling
doors.
1. With the Freezer door closed, remove the
upper hinge cover ( 1 ) using a screwdriver, and
then disconnect the wires ( 2 ).
(2)
(1)
Be careful, no damage sensor harness
with cover hinge.
2. Remove hinge bolts ( 3 ) with a 10 mm Socket
Wrench and a ground screw ( 4 ) counter-
clockwise, and take off the upper hinge ( 5 ) in
the direction of the arrow.
Be careful when removing the door to ensure
that it does not fall on you.
(4)
(3)
(5)
Pressing
SSEDA-14 (RS25H5121) ���.indd 12 2013. 11. 28. �� 11:28