Samsung LTN406WX-XAC - Manual (Page 34)

English-
24
3
Press the LEFT/RIGHT
buttons to select “Start”.
Press the ENTER
button.
The TV will begin memorizing
all of the available channels.
O P E R AT I O N
Storing Channels in Memory
(Automatic Method)
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about one to
two minutes.
Press ENTER at any time to
interrupt the memorization process
and return to the CHANNEL menu.
2
Press the UP/DOWN
buttons to select
“Auto program”.
Press the ENTER button.
1
First, select the correct signal
source (Air, STD, HRC, IRC).
See steps 1~2 on previous
page.
Press the MENU button.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
4
After all the available
channels are stored, the Auto
program menu reappears.
Press the MENU button to
exit.
Ex) Press ➔ ➔ to select cable channel 108.
To select channels over 100,
venus-04-en 6/28/03 8:16 AM Page 24