Samsung LTN406WX-XAC - Manual (Page 57)

English-
47
O P E R AT I O N
Changing the STEREO Settings
If you live in an area that has poor reception (due to weak frequency), you may hear
noise and experience poor sound quality during the channel selection. Set the stereo
setting to Off to eliminate the noise. Select Off and set the MTS setting to Mono.
• If the sound quality is poor while you are watching a program broadcast in stereo,
press the MTS button and select “Mono.”
• You cannot use the bilingual function while you are watching a program in mono.
• If you set the stereo setting to Off and change the channel, the setting remains
Mono regardless of the properties of the signals sent from the broadcaster.
• Press the MTS button to switch between Mono and Stereo.
(Please note that it works only when the broadcast is done in stereo.)
2
Press the UP/DOWN
buttons to select “MTS
Setting”, then press the
ENTER
button.
1
Press the MENU button to
display the menu.
Press the UP/DOWN
buttons to select “Sound”,
then press the ENTER
button.
3
Press the UP/DOWN
buttons to select “ON”, then
press the ENTER
button.
Press the MENU button to
exit.
venus-04-en 6/28/03 8:16 AM Page 47