Samsung LTN406WX-XAC - Manual (Page 43)

English-
33
O P E R AT I O N
To Select an External Output Device
You can select one from TV, Input1 (Component1), Input2 (Component2), and S-Video
to send the signals to a device connected to the output jacks.
2
Press the UP/DOWN
buttons to select “Video Out”,
then press the ENTER
button.
1
Press the MENU button to
display the menu.
Press the UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
3
Press the UP/DOWN
buttons to select the signal
source.
Press the MENU button
to exit.
• If a VCR is connected to the output jacks, you can record the signals
coming from the source of your choice.
• If the output is set to TV and the PIP window function is on, you can
select the audio from the PIP window. The output audio is automati-
cally changed to the audio from the PIP window.
venus-04-en 6/28/03 8:16 AM Page 33