Avenview SW-HDM3D-C5-4X4 - Manual (Page 18)

www.avenview.com 18
Notice
1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and
provide DVI/HDMI EDID information.
2. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz LAN cable
and ASTRODESIGN Video Signal Generator VG-859C.3
3. The transmission length is largely affected by the type of LAN cables, the type of HDMI sources, and the
type of HDMI display. The testing result shows solid LAN cables (usually in bulk cable 300m or 1000ft
form) can transmit a lot longer signals than stranded LAN cables (usually in patch cord form). Shielded
STP cables are better suit than unshielded UTP cables. A solid UTP CAT5e cable shows longer
transmission length than stranded STP CAT6 cable. For long extension users, solid LAN cables are your
only choice.
4. EIA/TIA-568-B termination (T568B) for LAN cables is recommended for better performance.
5. To reduce the interference among the unshielded twisted pairs of wires in LAN cable, you can use
shielded LAN cables to improve EMI problems, which is worsen in long transmission.
6. Because the quality of the LAN cables has the major effects in how long transmission distance will be
made and how good is the received display, the actual transmission length is subject to your LAN cables.
For resolution greater than 1080i or 1280x1024, a CAT6 cable is recommended.
7. If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input [HDMI input #1]
generally can produce better transmission performance among all HDMI inputs.