Avenview SW-HDM3D-C5-4X4 - Manual (Page 9)

www.avenview.com 9
1.7.5 HDM3D-C5SW-R
IR Blaster Cable IR Receiver Cable
IR Main The default location for IR emitter extension cable to transmit all IR command signals received
from any of the four remote receivers to all of the HDMI sources.
IR1 IR emitter extension cable connected here can only transmit IR command signals from the
remote receivers that are setting at the input channel 1.
IR2
IR emitter extension cable connected here can only transmit IR command signals from the
remote receivers that are setting at the input channel 2.
IR3 IR emitter extension cable connected here can only transmit IR command signals from the
remote receivers that are setting at the input channel 3.
IR4 IR emitter extension cable connected here can only transmit IR command signals from the
remote receivers that are setting at the input channel 4.
Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please check
carefully before plugging in the IR extender to the respective IR sockets. Warranty will not cover the damage.