Reconnect a headset or car kit, Disconnect or unpair from a bluetooth phone, Send and receive information using bluetooth – Samsung SPH-D710ZKASPR User Manual
Page 144
Tools and Calendar
132
Reconnect a Headset or Car Kit
When you have paired a headset with your phone, you should be able to reconnect it
automatically by turning on Bluetooth on your phone and then turning on the headset. However,
sometimes you will need to reconnect manually, for example if you have been using your
headset with another Bluetooth phone.
1. Press
>
and tap Settings > Bluetooth.
2. If Bluetooth is not switched on, slide the Bluetooth On/Off slider to the right to turn
Bluetooth on.
3. Make sure that the headset is discoverable.
4.
Tap the headset’s name in the Bluetooth phones section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in
Disconnecting or Unpairing From a Bluetooth Phone
, and then follow the instructions in
Connect a Bluetooth Headset or Car Kit
Disconnect or Unpair From a Bluetooth Phone
You can disconnect your phone or forget its pairing connection with another Bluetooth device.
To connect to the device again, you may need to re-enter or confirm a passcode.
Disconnect a Bluetooth Phone
1. Press
>
and tap Settings > Bluetooth.
2. In the Bluetooth phones section, tap the phone to disconnect.
3. Tap Disconnect.
Unpair from a Bluetooth Phone
1. Press
>
and tap Settings > Bluetooth.
2. In the Bluetooth phones section, tap the phone to unpair.
3. Tap Unpair.
Send and Receive Information Using Bluetooth
You can use Bluetooth to transfer information between your phone and another Bluetooth-
enabled phone such as a phone or notebook computer. The first time you transfer information
between your phone and another phone, you need to enter or confirm a security passcode.