Samsung SM-T537VYKAVZW - Manual (Page 78)

73
Controlling the Camera Remotely
Set a device as a viewfinder to control the camera remotely.
1. Touch Options ➔ ➔ Remote viewfinder, and
then connect the device and the camera using
Wi-Fi Direct.
2. Touch to take a photo remotely using the device as a
viewfinder.
Configuring Settings for Camera
Ⅲ Touch to configure settings for Camera. Not all of
the following options are available in both still camera
and video camera modes. The available options vary
depending on the mode used.
Camera
• Photo size: Select a resolution. Use higher resolution
for higher quality. Higher resolution photos take up
more memory.
• Metering: Select a metering method. This determines
how light values are calculated. Center weighted
measures background light in the center of the scene.
Spot measures the light value at a specific location.
Matrix averages the entire scene.
Video recorder
• Video size: Select a resolution. Use higher resolution
for higher quality. Higher resolution videos take up more
memory.
Settings
• Location tag: Attach a GPS location tag to the photo.
Note: To improve GPS signals, avoid shooting in locations
where the signal may be obstructed, such as between
buildings or in low lying areas, or in poor weather
conditions.
Tip: Your location may appear on your photos when you
upload them to the Internet. To avoid this, deactivate the
GPS tag setting.