Samsung HT-FM45-ZA - Manual (Page 14)

| 14
English
Connections
Connecting to a TV and External Devices
HDMI OUT LAN
POWER AUX IN FM ANT
OPTICAL DIGITAL AUDIO IN
L
R SPEAKERS OUT CENTER SUBWOOFER
FRONT L
SURROUND L
FRONT R
SURROUND R
SPEAKER IMPEDANCE : 3
Ÿ
HDMI OUT LAN
AUX
IN FM ANT
OPTICAL
DIGITAL
AUDIO IN
L
R
OPTICAL OUT HDMI IN
R
Red
W
White
Method 1 Method 2
External Devices
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on
your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with only this cable
connected. See page 18 in this manual and the section on ARC in your TV's user's manual for details.
Connecting to External Devices
To select the correct mode for an external device after you have connected the device, press the FUNCTION button.
Each time you press the button, the mode changes in this order : BD/DVD D. IN AUX FM
Two methods of connecting external devices to your home theater are explained below.
Method 1 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the
external analog component.
 Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-
Top-Boxes): Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device using a digital optical cable.
 Select the D. IN mode.
| NOTES |
\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
HT-FM45_ZA_0530.indd 14 HT-FM45_ZA_0530.indd 14 2013-05-30 오후 3:23:37 2013-05-30 오후 3:23:37