Samsung SGH-I897ZKMATT - Manual (Page 114)

109
• Alerts on call: activates an alert tone for new messages being
received during an active call.
Voice call
To configure voice calls:
1. From the Home screen, tap ➔ Settings ➔ Call settings
➔ Voice call.
2. Tap one of the following options:
• Call forwarding: incoming calls are re-routed to a secondary
number that you specify.
• Call barring: restricts specific types of incoming and outgoing calls
on your phone.
• Call waiting: this network service informs you when someone is
trying to reach you during another call. Specify individual call
waiting options for voice calls.
• Auto redial: automatically redials the last number if the call was
either cut off or was unable to connect.
• Noise suppression: Your phone is equipped with an advanced
voice processing chip that delivers clear mobile calls by
suppressing background noise, intermittent sounds (like a siren or
nearby conversation), and echoes, allowing you to hear and be
heard nearly anywhere. Tap Noise suppression to activate.
Fixed Dialing Numbers
Fixed Dial Number (FDN), allows you to restrict outgoing calls to a
limited set of phone numbers.
Enabling FDN
1. From the Home screen, tap ➔ Settings ➔ Call settings
➔ Fixed Dialing Numbers.
2. Tap Enable FDN.
3. At the prompt, enter your PIN2 code and tap OK.
FDN is enabled.
4. To enable FDN after it has been disabled, tap Disable FDN,
enter your PIN2 code and tap OK.
Important!: Not all SIM cards use a PIN2 code. If your SIM card does not, this
menu does not display.
The PIN2 code is provided by your carrier. Entering an incorrect
PIN2 code could cause the phone to lock. Contact customer
service for assistance.
Changing the PIN2 Code
1. From the Home screen, tap ➔ Settings ➔ Call settings
➔ Fixed Dialing Numbers.
2. Tap Change PIN2.