Samsung SGH-I897ZKMATT - Manual (Page 140)

135
5. Tap Save to store the new information and connect to your
target WAP.
Note: The next time your device connects to a previously accessed or
secured wireless network, you are not prompted to enter the WAP key
again, unless you reset your device back to its factory default settings.
Turning Wi-Fi Off
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Tap the Wi-Fi field to deactivate the feature. The green
checkmark will be removed.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
cause an added drain to your battery and reduce your use times.
Manually Scan for a Wi-Fi Network
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Press ➔ Scan.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless Access
Point (WAP).
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set
up many of your device’s Wi-Fi service, including:
• Setting your Wi-Fi sleep policy
• Viewing your device’s MAC Address
• Configuring use of either a DHCP or Static IP
To access the Bluetooth Settings menu:
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Press ➔ Advanced.
For more information, refer to “Network Notification” on
page 102.