Samsung HPN4239X-XAC - Manual (Page 24)

47 46
Freezing the Picture
Still
Press the STILL button on the remote control to freeze a
moving picture. Press again to cancel.
Changing the Screen Size
W W ide ide
Sets the picture to 16:9 wide mode.
Panorama
Converts regular 4:3 aspect ratio screen to
wide screen.
Zoom1
The screen size when Wide screen is vertically
enlarged.
Zoom2
The screen size when the Zoom1 screen is
vertically enlarged.
Normal (4:3)
Sets the picture to 4:3 normal mode.
Notes
• In TV, VIDEO, S-VIDEO and Component (480i) modes, all screen modes can be selected.
(Wide ➞ Panorama ➞ Zoom1 ➞ Zoom2 ➞ Normal).
• In PC/DVI mode, only Wide & Normal modes can be selected.
• In Component (480p, 720p. 1080i) modes, Panorama mode can’t be selected.
• In Component (480p, 720p. 1080i) modes, you can move the picture on screen by pressing
the ▲ or ▼ button. (All screen modes)
• Changing the screen size to Normal, Zoom1 or Zoom2 during PIP mode will cause the PIP
window to disappear.
When you press the ASPECT button on the remote control, the PDP’s screen mode should appear in
sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Normal.
Note
• If you watch a still image or the Normal (4:3) mode for a long time (over 2 hours), an image may
be burned onto the screen. View the monitor in Wide or Panorama mode as much as possible.
Wide
Panorama Normal
Zoom1 Up/Down
Zoom2 Up/Down