Samsung MX-HS7000-ZA - Manual (Page 11)

02
Getting Started
Attaching the Toroidal Ferrite Core to the Cord of the Subwoofer
Attaching the Toroidal ferrite core to the cord of the subwoofer helps prevent RF
interference from radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Make one loops around the core with the cable of the subwoofer.
3. Attach the Toroidal ferrite core to the Subwoofer cord as the
figure shows, and then press it until it clicks.
LOOPING THE CABLE AROUND THE TOROIDAL CORE
Lift up to release the lock and open the core.
Make one loops around the core with the cable.
(Start winding 2 to 4 inches [5-10 cm]
away from the core).
Close the lock.
(MX-HS7000)
(MX-HS6000)
11
English
02680D-MX-HS6000-ZA-ENG-20140304.indd 11 2014/3/17 15:47:39