Samsung MX-HS7000-ZA - Manual (Page 16)

Searching for a Track Quickly
You can select a track directly without the 1,
2 button.
CDDA/MP3-CD/USB
1. Press the SEARCH button.
After pressing the SEARCH button, turn
the VOLUME/SEARCH JOG control on
the product to the left or right to select a
desired track.
• You can move to the selected track
directly.
2. When searching is done, the track will
automatically start playing.
Using the Program Function
This function is not available during playback
of an MP3-CD/USB.
• You can program the playback order of up
to 99 tracks of your choice.
• However, you must stop playing the CD/USB
before selecting tracks.
1. While in CD/USB playback mode, press the
5 button to stop playing the CD/USB.
2. Press the PROGRAM button to display the
message below:
P0 1 --
Or
0 1 ---
(01= program number, -- or ---= track number)
3. Use the 1 or 2 button or the VOLUME/
SEARCH JOG to move to a desired track.
• Press 1 to move to the previous track.
• Press 2 to move to the next track.
4. Press the ¬ button to confirm your
selection. The selection is stored and
P0 2 -- Or 0 2 --- is displayed.
5. To select another track, follow Steps 3 and
4 above.
6. Press the button to play the
programmed tracks.
7. Press the 5 button to stop playing the
programmed tracks, Press the 5 button
again to cancel playing the programmed
tracks.
• If you eject the disc, CD programming is
cancelled.
If you turn off the product, CD/USB
programming is cancelled.
• If you switch to another mode,CD/USB
programming is maintained.
• In Program mode, if you press the USB
REC, DELETE, or TUNING/ALBUM ,, .
buttons, these functions will not work,
and the unit will display "PROG".
Viewing or Editing Programmed Tracks
You can view and edit a list of programmed
tracks.
1. If a programmed track is being played,
press the 5 button once.
2. Press the PROGRAM button twice to
display the message below:
C0 1 02
Or
0 1 002
(01= program number, 02 or 002 = track
number)
3. Repeatedly press the ¬ button until the
desired track is displayed.
4. Press the 1 or 2 button to select a
different track.
5. Press the ¬ button to confirm your
selection.
6. To play the programmed tracks, press the
button.
To repeat
1. Press the REPEAT button.
Each time you press this button, the mode
will change as follows:
OFF ; TRACK ; ALL
<Search Display>
0 12 0 25
Total track
Indicator
Selected Track
Indicator
Functions
16
English
02680D-MX-HS6000-ZA-ENG-20140304.indd 16 2014/3/17 15:47:43