Samsung SCH-R860ZKAMTR - Manual (Page 135)

Changing Your Settings 132
6. To save your new ringer settings and return to the Sound
Settings menu, press the OK soft key.
Alerts
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
1. From the Settings menu, select Sounds Settings ➔ Alerts.
The following Alerts options appear in the display:
• Minute Beep — Sounds an alert ten seconds before each elapsed
minute of a call.
• Roaming — Sounds an alert when you leave your home service
area during a call.
• Call Connect — When you make a call, an alert sounds when the
call is answered.
• Power On — Plays a melody when the phone is being turned on.
• Power Off — Plays a melody when the phone is being turned off.
2. Select the desired Alert option setting (On or Off).
3. To save your new alert settings and return to the Sound
Settings menu, press the OK soft key.
Key Tone
Key Tone lets you select the volume and the length of the DTMF
tones that the r860 sends when dialing.
1. From the Settings menu, select Sounds Settings ➔ Key
Tone.
The following options appear in the display:
• Tone Level — Lets you set the volume for the key tones (Silence,
Low, Low/Medium, Medium, Medium/High, High).
• Tone Length — Lets you set the length of the key tones (Short,
Long).
2. To save your new setting and return to the Key Tone menu,
press the OK soft key.
Vibrating Alert
Vibrating Alert lets you set your phone to vibrate in sync with
ringtones and melodies your phone plays.
1. From the Settings menu, select Sounds Settings ➔
Vibrating Alert.
2. Select On or Off.
3. To save your new setting and return to the Sound Settings
menu, press the OK soft key.
Call Settings
ᮣ From the Settings menu, select Call Settings. The following
options are available.
Call Answer
You can select a specific answer mode when you receive an
incoming call.