System select, Set time, Touch sensitivity – Samsung SCH-R860ZKAMTR User Manual
Page 142
139
System Select
The System Select menu allows you to select the roaming setting
for your phone.
1.
From the Phone Settings menu, select System Select.
The following roaming options appear in the display:
• MetroPCS Only — Roaming is off. If your home system is not
available then your calls will not be connected, and the No Service
icon (
) appears in the display. In some service areas, an
operator may come on-line and ask you how you would prefer to
pay for a call.
• Automatic — Roaming is on. This option will always try to connect
your calls using a digital service in the Preferred Roaming List (PRL)
loaded into your phone. If a preferred service is not found, then this
option will attempt to acquire any digital service.
2.
Select the preferred roaming option, then press OK.
Set Time
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
With Airplane Mode set to On, this function is enabled. In digital service
mode, setting Airplane Mode to Off also disables Set Time. (For more
information, refer to “Airplane Mode” on page 135.)
1.
From the Phone Settings menu, select Set Time.
The following options appear in the display:
• Set Date
• Set Time
2.
Select the desired option.
• For Set Date, the Set Date screen appears in the display.
–
Use the up and down arrow buttons to select the current date.
–
Press the OK soft key to save your date setting.
• For Set Time, the Set Time screen appears in the display.
–
Use the up and down arrow buttons to select the current time.
–
Press the OK soft key to save your time setting.
Touch Sensitivity
Touch Sensitivity lets you adjust how much pressure you must
apply to the screen for the r860 to react.
1.
From the Settings menu, select Phone Settings
➔
Touch
Sensitivity.
The Touch Sensitivity screen appears in the display.
2.
Press, hold, and slide the Touch Sensitivity button left or
right to adjust the screen’s responsiveness to your touch
(1 – 5).
3.
Test your setting by applying pressure to the Touch Here
button until it responds.
4.
If desired, repeat steps 2 and 3 until the Touch Sensitivity
setting is acceptable.