Samsung SCH-R860ZKAMTR - Manual (Page 28)

25
Review the Calls Log
1. In Standby mode, press the
Menu soft key, then select
Calls. The Calls list appears
in the display showing All
calls.
2. Select the Down arrow in the
upper right corner of the
screen. The following Calls
log options appear in a drop-
down menu:
• All
• Incoming
• Outgoing
• Missed
• Data
Note: To review your r860’s Call Timers or Data Counters, press the Call
Timer soft key or the Data Counter soft key.
3. Select the Calls log that you wish to review.
Note: In cases where a Calls log entry concerns a call to or from a Contacts
entry, the Contact name associated with the number appears in the
Calls log list instead of the number.
4. The following functions are also available:
• Erase — Press this soft key to delete selected or All unlocked calls
from the displayed call log.
• Lock / Unlock — Press this soft key to block/permit deletion of
individual calls.
• Call Timer — Press this soft key to list the duration of the Last Call;
total durations of all Outgoing Calls, Incoming Calls, Roaming Calls,
All Calls since the timers were last reset; the date and time the
timers were last reset; and the total duration of Lifetime Calls (all
calls since your phone was activated — this timer cannot be reset).
• Data Counter — Press this soft key to list the amount of data (in
kilobytes) Transmitted, Received, and Total data transferred since
the timers were last reset; the date and time the timers were last
reset; and the total amount of data transferred in Lifetime Data
Counter (all data calls since your phone was activated — this timer
cannot be reset).
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
Note: In Standby mode, you can quickly view your most recent calls of all
types by briefly pressing . A list containing up to 270 of your most
recent outgoing, incoming, and missed calls appears in the display.
1. In Standby mode, press the Menu soft key, then select