Samsung HT-EM53C-ZA - Manual (Page 17)

English
17 |
03
Connections
Connecting the Optional Wireless Receiver Module
To connect the surround speakers wirelessly, you have to purchase the wireless receiver module and
TX card from your Samsung retailer.
• This product should be connected with the SWA-5000 only.
1. Follow the 1 to 3 steps as shown on the previous page.
2. With the product turned off, insert the TX card into the TX Card
Connection (WIRELESS) on the back of the product.
• Hold the TX card so that the label "WIRELESS" faces upward and
insert the card into the port.
• The TX card enables communication between the product and the
wireless receiver module.
3. Connect the left and right surround speakers to the wireless receiver
module. Again, match the color of the plugs to the jacks on the
wireless receiver module.
4. Plug the power cord of the wireless receiver module into the
wall outlet.
5. Turn on the product. The product and wireless receiver module will
now communicate with each other and you will hear sound from the Surround speakers.
HDMI OUT LAN WIRELESS
TX card
IMPEDANCE : 3
SPEAKERS OUT
SURROUND
SURROUND
HDMI OUT LAN WIRELESS
IMPEDANCE : 3
SPEAKERS OUT
SURROUND
SURROUND
Front
Speaker (R)
Subwoofer
Center Speaker
Wireless Receiver Module
Surround
Speaker (L)
Front
Speaker (L)
Surround
Speaker (R)
HT-EM53C_ZA_0417-1(D2D).indd 17 HT-EM53C_ZA_0417-1(D2D).indd 17 2012-04-17 오후 6:48:23 2012-04-17 오후 6:48:23