Appendix – Samsung HT-EM53C-ZA User Manual

Page 58

Advertising
background image

|

58

English

Appendix

Troubleshooting

Refer to the table below when this product does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect
the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).

Symptom

Check/Remedy

I cannot eject the disc.

• Is the power cord plugged securely into the outlet?

• Turn off the power and then turn it back on.

The iPod fails to connect.

• Check the condition of the iPod connector.

• Keep the iPod software version up to date.

Playback does not start.

• Check the region number of the Blu-ray/DVD disc.

Blu-ray/DVD disc purchased from abroad may not be playable.

• CD-ROMs and DVD-ROMs cannot be played on this product.

• Make sure that the rating level is correct.

Playback does not start
immediately when the
Play/Pause button is
pressed.

• Are you using a deformed disc or a disc with scratches on the surface?

• Wipe the disc clean.

Sound is not produced.

• The home theater does not play sound during fast playback, slow playback,and step motion

playback.

• Are the speakers connected properly? Is the speaker setup correctly customized?

• Is the disc severely damaged?

Sound can be heard only
from a few speakers and not
all 6.

• On certain Blu-ray/DVD discs, sound is output from the front speakers only.

• Check if the speakers are connected properly.

• Adjust the volume.

• When listening to a CD, radio or TV, sound is output to the front speakers only.

Dolby Digital 5.1 CH
Surround Sound is not
produced.

• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is

produced only if the disc is recorded with 5.1 channel sound.

• Is the audio language correctly set to Dolby Digital 5.1-CH in the information display?

The remote control does not
work.

• Are you operating the remote within its operational range and within the proper angle relative to

the sensor?

• Are the batteries drained?

• Have you selected the mode (TV/BD) functions of the remote control (TV or BD) correctly?

• The disc is rotating but no

picture is produced.

• Picture quality is poor and

picture is shaking.

• Is the TV power on?

• Are the video cables connected properly?

• Is the disc dirty or damaged?

• A poorly manufactured disc may not be playable.

Audio language and subtitles
do not work.

• Audio language and subtitles will not work if the disc does not contain them.

HT-EM53C_ZA_0417-1(D2D).indd 58

HT-EM53C_ZA_0417-1(D2D).indd 58

2012-04-17 오후 6:50:00

2012-04-17 오후 6:50:00

Advertising