Samsung HT-EM53C-ZA - Manual (Page 21)

English
21 |
03
Connections
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button,
the mode changes in this order : BD/DVD D. IN AUX R. IPOD FM
OPTICAL
VIDEO
OUT
AUX
IN
DIGITAL
AUDIO IN
FM ANT
AUDIO OUT OPTICAL OUT
IMPEDANCE : 3
SPEAKERS OUT
SURROUND
SURROUND OPTICAL
VIDEO OUT AUX IN
DIGITAL AUDIO IN FM ANT HDMI OUT LAN WIRELESS
R
Red
W
White
Method 1
Method 2
External Devices
(Cable not supplied.)
(Cable not supplied.)
Method 1 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device using a digital optical cable.
 Select the D. IN mode.
Method 2 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analog component.
 Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
| NOTE |
\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
HT-EM53C_ZA_0417-1(D2D).indd 21 HT-EM53C_ZA_0417-1(D2D).indd 21 2012-04-17 오후 6:48:29 2012-04-17 오후 6:48:29