Samsung EC-HZ25WZBPBUS - Manual (Page 119)

118
FAQ
Ê When you can not playback the recorded movie clip on your computer.
Ä When you can not playback the recorded movie clip on your
computer, it is mostly caused by the video codec installed on the
computer.
[How to playback the H.264(MPEG4.AVC) movie clips]
• Using the QuickTime Player 7.6
Install the “QuickTime Player 7.6” provided in the CD.
(The QuickTime Player 7.6 supports the H.264(MPEG4.AVC)
compression for videos.)
ĺ Plays back using the “QuickTime Player 7.6”.
• How to use with installing United Codec
We recommend that install the latest United Codec. (Recom-
mendable Codec : K-Lite Codec Pack Full latest version)
ĺ Plays back using the “video player.”
(When installed K-lite codec with its full version, the Media
Player Classic or Windows Media Player 11 is recommended)
Ä “QuickTime Player 7.6”, “K-lite United Codec full version” should
be installed in Windows ServicePack2 or later.
Ä Although the computer is guaranteed as operated, the playback
might be intermittent depending on an user’s computer.
Ê When the DirectX 9.0c or later is not installed
à Install the DirectX 9.0c or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\
DirectX] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the following site for
downloading the DirectX.http://www.microsoft.com/directx
Ê  If a PC connected with the camera stops responding while
Windows is starting.
à In this case, disconnect the PC and the camera and Windows
will start. If the problem happens continuously, set the Legacy
USB Support to disable and re-start the PC. The Legacy USB
Support is in the BIOS setup menu. (The BIOS setup menu
differs from the PC manufacturers and some BIOS menus don’
t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.