71 activating, 3d mode, Setting 3d effects – Samsung KN55S9CAFXZA User Manual
Page 78: Activating 3d mode
70
71
Activating 3D Mode
Screen Menu >
Picture
>
3D
>
3D Mode
Try Now
Choose a 3D mode according to the input signal. Available 3D modes may vary depending on the
input signal. Some 3D contents may differ prefered 3D mode. In this case, change the desired 3D
mode for watching. Select a 3D mode from the available 3D modes depending on the input signal.
Available 3D modes may vary depending on the input signal.
●
Off: Deactivates 3D viewing.
●
Normal: Converts normal images to 3D images. Some formats do not support this mode.
●
L/R: Splits a single image into left and right overlapping images to create the 3D effect.
●
T/B: Splits a single image into top and bottom overlapping images to create the 3D effect.
●
Horizontal Line: Switches between left and right images one horizontal line at a time.
●
Vertical Line: Switches between left and right images one vertical line at a time.
●
Pixel: Switches between left and right images one pixel at a time.
●
Frame: Switches between left and right images one frame at a time.
"
(Horizontal Line),
(Vertical Line), and
(Pixel) can only be selected when the computer's resolution
is set to 1920x1080 or the computer is connected to the TV via an HDMI-DVI cable.
"
(Frame) can only be selected when the computer's resolution is set to 1920x1080 and the frequency to
60Hz.
"
When viewing a 3D content in
(horizontal Line),
(Vertical Line),
(Pixel), and
(Frame) modes
using the
Samsung Multi View
function, the 3D mode will be set to
(T/B) mode automatically.
Resolutions supported by the TV may vary, depending on the 3D mode. For details, see "Supported 3D
Resolutions".
Setting 3D Effects
There are several adjustments that can be made to make 3D content more enjoyable.
●
3D Perspective
: Adjusts the 3D perspective.
Try Now
●
Depth
: Adjusts the 3D depth. This option cannot be used if 3D mode is set to
(L/R) or
(T/B).
Try Now
●
L/R Change
: Swaps the left and right pictures.
Try Now
●
3D → 2D
: Converts 3D images to normal images. This function is not available if 3D mode is set
to
(Normal) or
(Off).
Try Now