Samsung BD-C8000-XAA - Manual (Page 61)

English
61
07
Network Services
Starting Internet@TV for the First Time
To start up Internet@TV for the first time, follow
these steps:
Access Internet@TV as described on the
previous page. The Internet@TV screen
appears. In most cases, immediately after, the
Country screen appears.
If the Country screen has appeared, use the
▲▼◄►buttons to select your country. When
done, press Enter.
NOTE
Certain applications are available only in certain
countries.
The General Disclaimer screen appears. Use
the ◄► buttons to move to Agree, and then
press Enter.
NOTE
Screens can take a few seconds to appear.
The Internet Privacy Policy screen appears.
Use the ◄► buttons to move to Agree, and
then press Enter.
The Service Update screen appears and
installs a number of services and applications.
When done, it closes. The applications
and services downloaded are listed on the
Internet@TV screen.
NOTE
Internet@TV may close momentarily during the
installation process.
A number of screens appear after installation. You
can press Enter to close them or let them close on
their own.
To start an application, use the ▲▼◄►
buttons to highlight the application, and then
press Enter. The application starts.
Account Login
For a more enjoyable application experience,
register and log in to your account.
To do this, you must create an account first.
(For instructions on creating an account, refer to
Internet@TV ID on page 62.)
Press the ▲▼◄► buttons to select the desired
application and press the RED (A) button.
1.
2.
✎
▪
3.
✎
▪
4.
5.
✎
▪
▪
6.
1.
Enter your user account and password.
Settings
Create IDs and configure Internet@TV settings
on this screen. To accesss the Settings screen,
click the Settings button on lower left of the main
Internet@TV screen.
System Setup
Change the Service Lock password
The Service Lock password function lets you set
a password that you can then use to establish
password controlled access to Internet@TV
services such as Netflix and Blockbuster. After
you have set the password, you then set a service
to locked or unlocked on the Service Manager
screen. When a service is locked, you must enter
the Service Lock password to access it.
To use the Service Lock function, follow
these steps:
Highlight Change the Service Lock
password on the Settngs screen, and then
press Enter.
On the screen that appears, enter the current
password. If this is the first time you are using
the Service Lock function, enter the default
password, 0-0-0-0, using your remote. The
next screen appears.
2.
1.
2.
 System setup
 Internet@TV ID
 Service Manager
 Properties
Settings
Change the Service Lock password
Reset
' Cancel
BD-C8000-XAA-ENG-3_0703.indd 61 BD-C8000-XAA-ENG-3_0703.indd 61 2010-07-03 12:00:21 2010-07-03 12:00:21