Samsung LT27A750ND-ZA - Manual (Page 26)

◀ ▶ ◀
English
■ Auto Program
Scans for channels automatically and stores them in the TV’s memory.
To start Auto Program , follow these steps:
1. Push MENU m
→ Channel → ENTER
E on your remote.
2. Select Auto Program , and then press ENTER E .
3. Select Air or Cable or both by highlighting and then pressing ENTER E .
N If you selected Air or Cable or both on the Antenna screen, your choice will
already be selected.
4. Select Next , and then press ENTER E .