Samsung LT27A750ND-ZA - Manual (Page 36)

◀ ▶ ◀
English
● Position : Adjusts the picture position. Position is only available if Picture size
is set to Zoom1 , Zoom2 , Wide Fit , or Screen fit .
N
To use the Position function after selecting Zoom1 , Zoom2 , or Wide Fit ,
follow these steps:
● When you have set Double ( à , Œ ) mode in PIP (Picture-in-Picture),
you cannot set the Picture Size .
1. Press the d button to select Position .
2. Press the ENTER E button.
3. Press the u or d button to move the picture up or down.
4. Press the ENTER E button.
5. Select Close by pressing the d and r buttons sequentially. To reset the
picture position, press Reset .