Samsung LT27A750ND-ZA - Manual (Page 89)

▶ ◀ ▶
English
■
WPS(PBC) Network Setup
How to set up using WPS(PBC)
If your router has a WPS (PBC) button, follow these steps:
1. Go to Network Setting screen.
(MENU m
→ Network → Network
Settings → ENTER E ).
2. Select WPS(PBC) , press ENTER E ,
and then press ENTER E again.
3. Press the WPS(PBC) button on
your router within 2 minutes. Your TV
automatically acquires all the network
setting values it needs and connects to your network.
4. The network connection screen appears, and network set up is done.
Network Settings
Select a network connection type.
Wired
Previous
Next
Cancel
Wireless (General)
WPS(PBC)
One Foot Connection
Connect to the Access Point
easily by pressing the WPS(PBC)
button. Choose this if your Access
Point supports Push Button
Configuration(PBC)
2/6
● The displayed image may differ depending on the
model.