Samsung HPR8082X-XAA - Manual (Page 28)

28
1 If the television is in Standby mode, press the POWER
button on the remote control.
The message “Press ENTER to start.” is displayed.
Press the ENTER button to select Start.
The Language menu is displayed.
2 Select the appropriate language by pressing the
▲ or ▼ button.
Press the ENTER button to confirm your choice.
The Clock menu is displayed.
3 Press the ENTER button.
Press the
œ or √ button to move to the Hour, Minute,
or am/pm.
Set the Hour, Minute, or am/pm by pressing the
▲ or ▼ button.
Press the ENTER button.
4 When it has finished, the message “Enjoy your
watching.” is displayed.
Plug & Play Feature
When the PDP Monitor is initially powered On, basic customer settings proceed
automatically and subsequently: Setting the language and time.
Note
• The Plug & Play function operates after plugging in the PDP Monitor for the first time.
Press ENTER to start.
Plug & Play
Enter Exit
Start
Language
Enter Skip Move
English
Français
Español
Clock
Adjust Move Skip
Note
• The Language menu will automatically appear
after several seconds, even if the ENTER button is
not pressed.
Note
• You can set the Hour and Minute directly by
pressing the number buttons on the remote control.
Continued...
Hour Minute am/pm
12 00 am
Clock
Skip
Hour Minute am/pm
- - - - am
Enter
Enjoy your watching.
BN68-00852B-00Eng(026~035) 11/22/05 1:46 PM Page 28