Samsung HPR8082X-XAA - Manual (Page 88)

Troubleshooting
88
If the PDP Monitor seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, then call your nearest service center.
Problem
Poor picture.
No picture or sound.
Poor sound quality.
Your remote control does not
operate the PDP Monitor.
The PDP Monitor won’t turn on.
There is no screen image.
The image is too light or too dark.
The image is too large or too small.
Screen is black and power indicator
light blinks steadily.
Possible Solution
Check all wire connections.
Press the SOURCE button.
Make sure the PDP Monitor is plugged in.
Check that the Mute feature is Off.
Check if Internal Mute is set to ON.
Adjust the volume.
Check the battery charge of the remote control.
Check if the power plug is connected.
Check to see that both the PDP Monitor and the source
are plugged in and turned on.
Adjust the Brightness or Contrast settings.
Adjust the Size settings.
On your computer check; Power, Signal Cable.
The PDP Monitor is using its power management system.
Move the computer’s mouse or press any key on the
keyboard.
On your equipment check (STB, DVD, etc) ; Power,
Signal Cable.
The PDP Monitor is using its power management system.
Press the Source button on the panel or remote control.
Turn the PDP Monitor off and on.
BN68-00852B-00Eng(088~091) 11/22/05 1:54 PM Page 88