Samsung HPR8082X-XAA - Manual (Page 86)

86
1 Press the MENU button.
Press the
▲ or ▼ button to select “Setup”, then press
the ENTER button.
2 Press the ▲ or ▼ button to select “Multi Control”, then
press the ENTER button.
3 Press the ▲ or ▼ button to select “ID Setup”, then press
the ENTER button.
Select the ID setup number by pressing the
▲, ▼ or
numeric buttons.
• Multiple monitors must be set up using ID setup
numbers so they can be controlled. For example, the
first monitor should be set as number 01, the second
as 02 etc.
4 Press the ▲ or ▼ button to select “ID Input”, then press
the ENTER button.
Enter ID input number by using numeric buttons.
• The ID number for the selected display must match the
ID setup number.
5 Press the EXIT button to exit.
Notes
• To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode.
When PDP1's ID Input number is entered when PDP1 is set to the ID Input mode, PDP1 is switched to
the Menu screen and can be controlled by your PC and the remote control.
At this time, PDP2 cannot be controlled from your PC and PDP2's remote control is disabled.
• For further details, refer to the MDC program guide.
• The MDC system must be comprised of the same models i.e., all connected models must be the
HP-R8082.
Setting the MDC (Multiple Display Control)
After installing and setting up the MDC system software and connections, follow the instructions below
to specify the ID setup and input for the displays. This enables you to control the displays from your PC.
ID Setup : 00
ID Input : - -
Multi Control T V
Adjust Edit Return
ID Setup : 01
ID Input : - -
Multi Control T V
Enter ID Input Number
Plug & Play √
Language : English √
Time √
Blue Screen : Off √
Melody : On √
Color Weakness √
Energy Saving : Standard √
† More
Setup T V
Move Enter Return
ID Setup : 00 √
ID Input : - - √
Multi Control T V
Move Enter Return
00
▲
▲
- -
0 .. 9
0 .. 9
BN68-00852B-00Eng(078~087) 11/22/05 1:54 PM Page 86