Samsung ML-2955ND-XAA - Manual (Page 128)

Wireless network setup
38 2. Using a network-connected machine
3 Insert the supplied software CD into your CD-ROM drive.
4 Select the Wireless Setting and Installation option.
• Install Now: If you have already set up the wireless
network, click this button to install the machine’s driver to
use the wireless network machine. If you have not set up
the wireless network, click the Wireless Setting and
Installation button to set up the wireless network before
you click this button.
• Wireless Setting and Installation: Configure the wireless
network settings of your machine with a USB cable then
install the machine driver. This is only for users who have
not set up the wireless connection before.
5 Read the License Agreement, and select I accept the terms
of the License Agreement. Then, click Next.
6 The software searches the wireless network.
If the search has failed, you may check if the USB cable is
properly connected between the computer and machine,
and follow the instructions on the window.
7 After searching, the window shows the wireless network
devices. Select the name (SSID) of the access point you are
using and click Next.
If you cannot find the network name you want to choose, or
if you want to set the wireless configuration manually, click
Advanced Setting.
• Enter the wireless Network Name: Enter the SSID of
access point you want (SSID is case-sensitive).
• Operation Mode: Select Infrastructure.