Samsung ML-2955ND-XAA - Manual (Page 138)

Wireless network setup
48 2. Using a network-connected machine
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet
mask.)
- Gateway: 169.254.133.1
15 The wireless network connects according to the network
configuration.
16 When the wireless network settings are completed,
disconnect the USB cable between the computer and
machine.
17 Follow the instructions on the screen to complete the
installation. After the installation is finished, click Quit or
Restart.
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the
machine wirelessly to your computer by setting up an ad hoc
wireless network by following these simple directions.
► Items to prepare
• Network-connected computer
• Software CD that provided with your machine
• The machine installed with a wireless network interface
• USB cable
► Creating the ad hoc network in Macintosh
1 Check whether the USB cable is connected to the machine.
2 Turn on your computer and machine.
3 Insert the supplied software CD into your CD-ROM drive.
4 Double-click the CD-ROM icon that appears on your
Macintosh desktop.
5 Double-click the MAC_Installer folder > Installer OS X icon.
6 Click Continue.
7 Read the license agreement and click Continue.
8 Click Agree to agree to the license agreement.
9 When the message that warns that all applications will close
on your computer appears, click Continue.
10 Click Wireless Network Setting.
11 The software searches the wireless network devices.