Samsung ML-2955ND-XAA - Manual (Page 142)

Wireless network setup
52 2. Using a network-connected machine
Configuring the machine’s wireless network
Before starting you will need to know the network name (SSID) of
your wireless network and the network key if it is encrypted. This
information was set when the access point (or wireless router) was
installed. If you do not know about your wireless environment,
please ask the person who set up your network.
To configure wireless parameters, you can use SyncThru™ Web
Service.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable
connection status.
1 Check whether or not the network cable is connected to the
machine. If not, connect the machine with a standard network
cable.
2 Start a web browser such as Internet Explorer, Safari or Firefox
and enter your machine’s new IP address in the browser
window.
For example,
3 Click Login on the upper right of the SyncThru™ Web Service
website.
4 Type in the ID and Password then click Login.
• ID: admin
• Password: sec00000
5 When the SyncThru™ Web Service window opens, click
Network Settings.
6 Click Wireless > Wizard.
Wizard will help you setup the wireless network
configuration. However, if you want to set the wireless
network directly, select Custom.