Alpine PXA-H701 - Manual (Page 22)

21
-EN
FR
ES
DE
SE
IT
Adjustment procedure for Dolby Surround
Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater
accuracy.
Adjustment procedure
1
2
3
4
5
6
7
Speaker setup (page 22)
(Turning the speakers to be used on and off and setting their response)
Adjusting the speaker levels (page 22)
(Adjusting the signal output level to the various speakers)
Adjusting the DVD level (page 25)
(Adjust the volume (signal level) in the Dolby Digital, Pro Logic II, DTS
and PCM modes.)
Adjusting the acoustic image (page 24)
(Adjusting the acoustic image to achieve a sound as if the centre
speaker were directly in front of the listener)
Mixing bass sound to the rear channel (page 23)
(Achieving smooth sound in the rear seat by mixing the front audio
signals with the rear speaker signals)
Storing settings in the memory (page 28)
(Storing all the settings and adjustments made on the PXA-H701 (not
only the above settings/adjusts) in the memory)
Achieving powerful high volume sound (page 25)
(Achieving energetic sound with even greater power, like the sound in a
movie theater)
NOTE
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby Surround adjustments.