Samsung NV10 - Manual (Page 21)

ŝ20Ş
Starting the recording mode
ƈ Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while
recording a movie clip. Using this function, you can record your favourite scenes
into a movie clip without having to create multiple movie clips.
ƃ Using Successive Recording
1. Press the shutter button and movie clips are
recorded for as long as the available recording
time allows. Movie clips will still be recorded if the
shutter button is released.
2. Press the II button to pause recording. Press the
II button again to resume the recording.
3. If you wish to stop recording, press the shutter
button again.
ƈ To record a movie clip without voice
1. Press the extension menu button.
2. Select the [VOICE] ƍ [OFF] menu.
3. Press the shutter button and movie clip is
recorded for as long as the available recording
time without voice allows.
[MOVIE CLIP mode]
Things to Watch Out for When Taking Pictures
ƈ Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all way down to take the picture.
[Lightly press the shutter button] [Press the shutter button]
ƈ The available recording time may vary depending on shooting conditions and
camera settings.
ƈ When either the Flash Off or Slow synchro mode is selected in a low lighting
condition, the camera shake warning indicator ( ) may appear on the LCD
monitor. In this case, use a tripod, support the camera on a solid surface or
change to flash shot mode.
ƈ Shooting against the light :
Please do not take pictures into the sun. Taking a picture against the sun may
make the picture dark. To take a picture against the sun, please use the
[Backlight] in the scene shooting mode (see page 33), fill-in flash (see page 25),
spot metering (see page 27), or exposure compensation (see page 32).
ƈ Avoid obstructing the lens or the flash when you capture an image.
ƈ Compose the image by using the LCD monitor.
ƈ In some of the following conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- When the surroundings are dark.
OFF
ON
[Successive recording of a
movie clip]