Samsung LS22CRNSF-XAA - Manual (Page 21)

Model
Connecting the monitor
1. Connecting to a Computer
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Use appropriate connection for your computer.
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the [PC] port on the back of your monitor.
[PC]
2-2. Using the DVI (Digital) connector on the video card.
Connect the DVI cable to the [DVI-D] port on the back of your monitor.
[DVI-D]
3. Connect the [HDMI / PC DVI-D AUDIO IN] port on the rear side of the monitor to the sound card of
the PC.
You may enjoy clear and quality sound from the computer sound card using the monitor speakers.
(You don't need to install any separate speakers for your computer.)
You may get a blank screen depending on the type of video card you are using, if you connect
simultaneously both the D-sub and DVI cables to one computer.
If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen,
check to see if the monitor status is set to analogue.
Press '
' button to have the monitor double-check the input signal source.
SyncMaster 2280HD