Preparación, Preparation, English español – Samsung SC-DC173U-XAA User Manual

Page 20

Advertising
background image

ENGLISH

ESPAÑOL

Preparación

Instalación de la pila de litio

Instalación de la batería de litio para el reloj interno

1. Retire la batería de la parte posterior de la

Videocámara con DVD.

2. Abra la tapa de la batería de litio en la

parte posterior de la Videocámara con

DVD.

3. Coloque la pila de litio en su

compartimento, con el terminal positivo (+)

hacia arriba.

Tenga cuidado de no invertir la polaridad

de la batería.

4. Cierre la tapa de la pila de litio.

Instalación de la pila de litio en el mando a distancia (sólo SC-DC175/DC575)

1. Gire el compartimento de la batería hacia

la izquierda (como indica la marca

[ ]), utilizando la uña o una moneda para

abrirlo. Se abrirá el compartimento de la

pila.

2. Introduzca la pila con el terminal positivo

(+) hacia abajo y presiónela firmemente

hasta que oiga un sonido de bloqueo.

3. Coloque el compartimento de la pila

para que su marca [ ] coincida con la

marca [] del mando a distancia y gire

el compartimento hacia la derecha para

cerrarlo.

Precauciones referentes a la pila de litio

1. La pila de litio hace funcionar el reloj y los preajustes de la memoria,

incluso aunque retire la batería principal o el adaptador de CA.

2. La pila de litio de la Videocámara con DVD puede durar

aproximadamente 6 meses en condiciones de funcionamiento normales

desde el momento de su instalación.

3. Cuando la batería de litio se debilita o se agota, aparecerá el indicador

de fecha/hor

12:00 AM JAN.01.2007 cuando defina Date/Time en On.

Cuando suceda, sustituya la batería de litio por una nueva (tipo CR2025).

4. Existe peligro de explosión si la batería se coloca de forma incorrecta.

Cambie la pila sólo por una igual o de especificaciones equivalentes.

Advertencia: Mantenga la pila de litio fuera del alcance de los niños.

En caso de que alguien se tragara una por accidente, avise inmediatamente

a un médico.

Preparation

Lithium Battery Installation

Lithium Battery Installation for the Internal Clock

1. Remove the Battery Pack from the rear

of the DVD Camcorder.

2. Open the Lithium Battery Cover on the

rear of the DVD Camcorder.

3. Position the Lithium Battery in the Lithium

Battery Holder, with the positive (+)

terminal face up.

Be careful not to reverse the polarity of

the Battery.

4. Close the Lithium Battery Cover.

Installing the Lithium Battery in the Remote Control (SC-DC175/DC575 only)

1. Turn the battery holder counterclockwise

(as indicated with [ ] mark), using your

fingernail or a coin to open it. The battery

holder opens.

2. Insert the battery while the positive (+)

terminal faces down and press it firmly

until you hear locking sound.

3. Place the battery holder to match its

[ ] mark with the [

] mark on the

remote control, and turn the battery

holder clockwise to fix it.

Precautions regarding the Lithium Battery

1. The Lithium Battery maintains the clock function and preset contents of

the memory; even if the Battery Pack or AC Power adapter is removed.

2. The Lithium Battery for the DVD Camcorder lasts about 6 months under

normal operation from time of installation.

3. When the Lithium Battery becomes weak or dead, the date/time

indicator will display

12:00 AM JAN.01.2007 when you set the Date/

Time to On. When this occurs, replace the Lithium Battery with a new

one (type CR2025).

4. There is a danger of explosion if Lithium Battery is incorrectly replaced.

Replace only with the same or equivalent type.

Warning: Keep the Lithium Battery out of reach of children. Should a

battery be swallowed, consult a doctor immediately.

20

1

2

3

Battery

Holder

Advertising
This manual is related to the following products: