Preparación, Preparation, English español – Samsung SC-DC173U-XAA User Manual

Page 21: Utilización de la batería de iones de litio

Advertising
background image

ENGLISH

ESPAÑOL

Preparación

Utilización de la batería de iones de litio

Utilice únicamente una batería SB-LSM80 o SB-LSM160(no

suministrado).

Es posible que la batería esté un poco cargada en el momento de la

compra.

Carga de la batería de iones de litio

1. Coloque el interruptor

[Power] en [OFF]

2. Conecte la batería a la Videocámara con

DVD.

3. Conecte el adaptador de CA (TIPO

AA-E9) a la toma de corriente.

4. Abra la tapa del terminal DC IN.

5. Conecte el cable de CC al terminal

DC IN de la Videocámara con DVD.

El indicador de carga comenzará a

parpadear, mostrando que la batería

se está cargando.

6. Cuando la batería esté totalmente

cargada, desconecte la batería y el

adaptador de CA de la Videocámara

con DVD. Incluso con la videocámara

apagada, la batería se descargará.

Frecuencia de parpadeo

Velocidad de carga

Una vez por segundo

Menos del 50%

Dos veces por segundo

50% ~ 75%

Tres veces por segundo

75% ~ 90%

Deja de parpadear y queda
encendido

90% ~ 100%

Encendido durante un
segundo y apagado durante
un segundo

Error – Reinicialice la batería y el cable
de CC

Preparation

Using the Lithium Ion Battery Pack

Use SB-LSM80 or SB-LSM160 (not supplied) Battery Pack only.

The Battery Pack may be charged a little at the time of purchase.

Charging the Lithium Ion Battery Pack

1. Turn the

[Power] switch to [OFF].

2. Attach the Battery Pack to the DVD

Camcorder.

3. Connect the AC Power adapter(AA-E9

TYPE) to a wall socket.

4. Open the DC IN Jack Cover.

5. Connect the DC cable to the DC IN

jack on the DVD Camcorder.

The charging indicator will start to

blink, showing that the Battery is

charging.

6. When the Battery is fully charged,

disconnect the Battery Pack and the

AC Power Adapter from the DVD

Camcorder. Even with the Power

switched off, the Battery Pack will still

discharge.

Blinking time

Charging rate

Once per second

Less than 50%

Twice per second

50% ~ 75%

Three times per second

75% ~ 90%

Blinking stops and stays on

90% ~ 100%

On for a second and off for a

second

Error - Reset the Battery

Pack and the DC Cable

21

Power Switch

<Charging indicator>

5

Advertising
This manual is related to the following products: