Samsung SCH-L710RWBXAR - Manual (Page 122)

116
Turning Bluetooth On or Off
1. From the Home screen, sweep your finger from the top
of the screen downward to display Notifications.
2. Touch Bluetooth to turn Bluetooth On.
Touch Bluetooth to turn Bluetooth Off.
Pairing with a Bluetooth Device
Search for a Bluetooth device and pair with it, to exchange
information between your phone and the device.
After pairing, your phone and the target device will connect
with each other and exchange information without a
passcode or PIN.
Note: When connected, the Bluetooth connected icon
displays in the Status Bar. If you receive a new request
for connection while connected with a Bluetooth
headset, a new Bluetooth icon displays at the left of the
Status bar and Notifications displays the connection
request.
1. Activate the target device’s discoverable mode.
2. On your phone, turn on Bluetooth (see “Turning
Bluetooth On or Off” on page 116). A list of detected
devices pops-up on your display.
3. From the list of detected devices, touch the target
device, your phone attempts to automatically pair with
the target device.
If automatic pairing fails, then follow the prompts to
complete manual pairing:
• Enter a PIN for the target device and touch OK.
Tip: Some devices use a default passcode of 0000. Refer to
the target device’s user manual for more information.
• When prompted to connect with the target device, touch OK to
complete the connection, touch Cancel to retain the pairing
only.
Connecting with a Bluetooth Device
1. From the Home screen, touch Menu ➔ Settings ➔
Bluetooth. The Bluetooth screen appears in the display.
2. Under Available devices, touch a previously paired
device. The device connects with your phone.