Samsung SCH-L710RWBXAR - Manual (Page 135)

Settings 129
Advanced Wi-Fi settings
1. From the Settings screen, touch Wi-Fi ➔ Advanced.
2. Configure settings:
• Network notification: When enabled, your phone notifies you
of nearby Wi-Fi networks when you launch a high data-usage
application.
• Keep Wi-Fi on during sleep: Specify when to switch from
Wi-Fi to mobile data for data communications, when the phone
goes to sleep (when the backlight goes out). This setting can
affect your data usage, and the behavior of devices you
connect to your phone, such as when tethering or using Mobile
Hotspot.
• Check for Internet service: When enabled, your phone
checks for access to the Internet after connecting to a Wi-Fi
hotspot.
• Wi-Fi timer: When enabled, lets you set starting and ending
times for using Wi-Fi.
• MAC address: (Not configurable) View your phone’s MAC
address, needed for connecting to some secured networks
(only shows when Wi-Fi is active).
• IP address: (Not configurable) View your phone’s IP address
(only shows when connected to a Wi-Fi network).
Bluetooth
Your phone supports Bluetooth
®
4.0.
Bluetooth profiles
Bluetooth profiles are specifications for services supported
by individual devices. Profiles improve the ability of different
devices to work together. Your phone supports these
Bluetooth profiles:
• Headset: HSP v1.2 profile supports use of compatible Bluetooth
headsets for mono voice.
• Handsfree: HFP v1.5 profile supports Bluetooth headsets, and
may also support other compatible Bluetooth devices with
speakerphone capabilities.
• Stereo: A2DP v1.2, AVRCP v1.0, GAVDP 1.2, AVCTP 1.3 and
AVDTP 1.2 profiles support delivery of stereo audio to compatible
Bluetooth devices.
• Object Exchange: OPP v1.0 profile allows sending and receiving
of contact name cards (vCard 2.1) and calendar events
(vCalendar) between devices. PBAP v1.2 supports exchange of
Phone Book Objects.