Samsung SCH-L710RWBXAR - Manual (Page 142)

136
• Show advanced options: Enable to access advanced options,
including Broadcast channel, to specify the channel your device
uses for Portable Wi-Fi Hotspot.
Allowed Devices List
Control whether devices connect to your Portable Wi-Fi
Hotspot with the Allowed devices list. After you add devices
to the list, they can scan for your device and connect using
your device’s Wi-Fi hotspot name (SSID) and password.
Note: Using your phone as a mobile hotspot consumes battery
power and uses data service. While Portable Wi-Fi
Hotspot is active, your phone’s applications will use your
Wireless Provider’s data service. Roaming while using
your phone as a mobile hotspot will incur extra data
charges.
1. From the Settings screen, under Wireless and network,
touch More settings ➔ Tethering and portable hotspot ➔
Portable Wi-Fi hotspot. The Portable Wi-Fi hotspot
screen appears.
2. Touch Allowed devices ➔ , then enter the other
device’s Device name and MAC address.
3. Touch OK to add the device to the Allowed devices list.
Tip: For information about connecting to your Portable Wi-Fi
Hotspot, see “Connecting a Device via Portable Wi-Fi
Hotspot” on page 121.
NFC
Use NFC (Near Field Communication) to share information
between your phone and another NFC device by touching the
devices together, typically back-to-back.
For more information about sharing information with NFC,
see “Android Beam” on page 137 and “S Beam” on page
137.
1. From the Settings screen, under Wireless and network,
touch More settings.
2. Touch NFC to turn NFC On or Off.
Note: NFC must be turned on to use Android Beam or S Beam.
++