Samsung RF23HSESBSR-AA - Manual (Page 13)

RE-ATTACHING THE WATER
SUPPLY LINES
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts
in reverse order.
1. The Water Line must be fully inserted into the
center of the transparent coupler (Type A)
or the Guide Lines (Type B) to prevent water
leakage from the dispenser.
2. Insert the clip from the install pack and confirm
that it holds the line firmly.
Center of Transparent
coupler
The Guide Lines
Dispenser
clip A (1/4”)
(6.35 mm)
Type A Type B
clip A (1/4”)
(6.35 mm)
DISASSEMBLING THE FLEX
DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
(1)
2. Take off the cover ( 2 ) with the harness using a
flat-blade screwdriver (-).
(2)
3. Press the locking tab, and then separate the
Wire Connector.
4. Remove 1 hex head bolt from each side with a
socket wrench (10 mm).
English - 13
SETTING
UP