Samsung SGH-T349AGATMB - Manual (Page 102)

99
My phone name
When your phone’s Bluetooth visibility is turned On, it identifies itself using the name entered into this text field. This
name can be altered by selecting the pre-existing text and selecting a new text string in its place. This feature
should be paired with a Bluetooth security option.
1. From Idle mode, press Menu ➔ Settings ➔ Bluetooth ➔ My phone name and press the Select soft key or the
key.
2. Press the key to erase the previous name.
3. Use the phone’s keypads to enter a new name. The default input entry method is Abc, where the initial
character is Uppercase and each consecutive character in that same word is left as lowercase text.
4. Press the Save soft key or the key to save the new name.
Security modes
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its phone name and status. This
transmission can pose a security risk and incite unauthorized connection to your phone. It is recommended that you
active your phone’s Bluetooth security.
1. From Idle mode, press Menu ➔ Settings ➔ Bluetooth ➔ Security modes and press the Select soft key or the
key.
2. Highlight On or Off and press the Select soft key or the key.
Features
Actually, the Bluetooth specification is a protocol that describes how the short-range wireless technology works,
whereas individual profiles describe the services supported by individual devices. Profiles reduce the chance that
different devices integrate.
1. From Idle mode, press Menu ➔ Settings ➔ Bluetooth ➔ Features and press the Select soft key or
the key.
The following Service profiles are available:
• Headset: the remote Bluetooth headset enables both incoming and dialed calls.
• Handsfree: the remote Bluetooth car kit enables both incoming and dialed calls.
t349.book Page 99 Friday, March 27, 2009 3:01 PM