Samsung SCH-R500ZRACRI - Manual (Page 126)

123
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end that call before you can use
VoiceSignal again.
Voice Settings
Choice Lists
VoiceSignal uses choice lists when it is not confident it has correctly recognized a
name or number. In this case, it can display a list of up to three possible choices, and
prompt you to confirm the correct one.
You can change the way that VoiceSignal uses choice lists with name dialing, digit
dialing, and contacts. For each feature, you can choose to always see a choice list
(even if there is only one choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal displays a choice list
only when it is not confident it has correctly recognized the name or number.
To change the way VoiceSignal uses choice lists:
1. From the Voice Service menu, press (for Voice Settings), and
for Choice Lists the following options appear in the display:
• Automatic—VoiceSignal displays a choice list only when it is not sure if it has
correctly recognized the name or number.
• Always On—VoiceSignal always displays a choice list, even when there is only
one choice.
• Always Off—VoiceSignal never displays a choice list.
Use the navigation keys to highlight the Choice List behavior you prefer,
then press the
key to accept the new setting.
Sensitivity
1. From the Voice Service menu, press (for Voice Settings), and
for Sensitivity. The Sensitivity screen appears in the display.
2. Use the navigation keys to adjust the selected Sensitivity setting to Reject
More spoken commands or names or to Reject Less spoken commands
or names.
3. Press the key to accept the new setting.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the numbers you say, try
adapting digit dialing to your voice. Adapting can improve the accuracy of digit
recognition, especially for people with strong regional accents.
abc
abc abc