Samsung SCH-R500ZRACRI - Manual (Page 22)

19
When you end a call, your phone automatically drops out of Speakerphone mode.
In Speakerphone mode, press and hold the Speakerphone key ( ) to switch back
to using the earpiece.
Vibrate Mode
Silence all tones your phone makes and replace them with vibrations.
ᮣ In standby mode, repeatedly press and the Down volume key ( ) until
Vibrate appears in the display.
The volume key is on the upper left side of phone, near the upper left soft
corner of the display.
Adjust the Ringer
1. In standby mode, press the Volume key ( ) on the left side of the phone up
or down. Options are:
2. When you are satisfied with the setting, press the SET key ( ). Your
phone returns to standby mode.
Tip: You can also access the Volume-Voice Calls sub-menu by pressing the MENU key ( ), then
pressing the ,
,
, and keys. Use the Navigation key or the Volume key (on the upper
left side of your phone) to adjust the ringer volume setting.
Note: The Vibrate icon ( ) appears in the display when the phone is in Vibrate mode.
• Ringer Off • Medium
• Vibrate • Medium/High
• Low • High
• Low/Medium • Vibrate/High
wxyz def