Samsung SCH-R500ZRACRI - Manual (Page 141)

Changing Your Settings 138
Phone Settings
2. Press for Change Lock. You’re prompted to enter the new lock
code.
3. Enter the new lock code. You’re prompted to re-enter the new lock code
for verification.
4. Enter the new lock code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.
Emergency #
Your phone provides the option of storing three emergency numbers. Each number
can be up to 32 digits in length. All emergency numbers can be manually called at
any time, even when your phone is locked or restricted. This can be a useful feature
for controlling outgoing calls from your phone.
Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even
when the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Important!: Because of various transmission methods, network parameters, and user settings necessary
to complete a call from your wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling 911 or for any other essential or
emergency communications.
Remember to always turn your phone on and check for adequate signal strength
before placing a call.
Store Emergency Numbers
1. At the Settings menu, press (for Phone Settings), and for
Security. You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2. Enter the lock code, then press for Emergency #.
3. Press , , or to select from the three emergency number
entries.
4. Enter an emergency number (up to 32 digits in length).
5. Press the key to save the number that you entered.
abc
jkl def
def
abc
def