Banner, Backlight – Samsung SCH-U706HBAATL User Manual
Page 125
Changing Your Settings 122
for Dialing Font. The following options appear in the
display:
• Style — Sets font (Normal, Quill Pen, Sticky, or Color Dial) used to
show dialed numbers.
• Size — Sets size (Enable Zoom-out or Disable Zoom-out) of the
Style font used to show dialed numbers.
2.
Use the Navigation key to highlight the desired option and
setting, then press the
key to save the setting.
Banner
Create your own personalized greeting that appears in the
display while your phone is in standby mode.
1.
In standby mode, press the MENU key (
), then press
(for Settings),
(for
Display Settings), and
for Banner. The Banner text entry screen appears in
the display.
Note: If necessary, press and hold the
key to erase an existing banner.
2.
Enter a word or short phrase (up to 12 characters) to
appear in your phone’s display while in standby mode. (For
more information, refer to “Entering Text” on page 34.)
3.
Press the
key to save the new banner.
Backlight
You can set the backlight for your display or keypad to remain on
or off or to remain on for a specified period of time.
Note: Prolonged backlight use drains your battery faster.
1.
In standby mode, press the MENU key (
), then press
(for Settings),
(for
Display Settings), and
for Backlight. The following sub-menus appear in the
display:
• Main Display — Sets the amount of time the main display
backlight remains on with the phone idle. Optional settings are 7,
15, and 30 Seconds and Always On (this setting uses much more
power than the timed settings) and Always Off.
• Keypad — Sets the amount of time the main display backlight
remains on with the phone idle. Optional settings are 7, 15, and 30
Seconds and Always On (this setting uses much more power than
the timed settings) and Always Off.
• Brightness — Use the Left and Right soft keys to select between
any of 5 optional settings.
2.
Use the navigation keys to highlight an option.
3.
Press the
key to enter the highlighted option’s sub-
menu and to save changed settings as desired.