Samsung SCH-U706HBAATL - Manual (Page 127)

Changing Your Settings 124
– Picture/Video Message
– Voicemail
3. Use the navigation keys to highlight an option, then press
the key to enter the highlighted option’s sub-menu.
4. Use the navigation keys to highlight a ringer, then press
the key to save changed settings as desired.
Alerts
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
1. In standby mode, press the MENU key ( ), then press
(for Settings), (for Sounds Settings), and
for Alerts. The following Alerts sub-menus appear in the
display:
• Minute Beep — Sounds an alert ten seconds before each elapsed
minute of a call.
• Roaming — Sounds an alert when you leave your home service
area during a call.
• Call Connect — When you make a call, an alert sounds when the
call is answered.
• Power On/Off — Plays a melody when the phone is being turned
on or off.
To set a Melody Alert or Vibrating Alert
2. Use the navigation keys to highlight a sub-menu, then
press the key.
3. Use the Up and Down navigation keys to highlight On or
Off.
4. Press the key to confirm your selection.
Key Tone
Key Tone lets you adjust the volume level and length of tone that
the keypad generates each time you press a key.
1. In standby mode, press the MENU key ( ), then press
(for Settings), (for Sounds Settings), and
for Key Tone. The following options appear in the display:
• Tone Level (volume)
• Tone Length
Tone Level is highlighted.
2. Press the key to adjust the Key Tone volume.
• Use the volume keys or navigation keys to set the keypad tones
volume.
• Press the key when the desired key beep volume setting is
reached. You are returned to the Key Tone sub-menu.