Samsung SPH-M840UWABST - Manual (Page 12)

Removing the battery
1. Remove the battery cover by gently pulling up on
the slot provided.
2. Lift the battery out of the phone.
3. Replace the battery cover.
Charging the Battery
Keeping track of your battery’s power level is important.
If the power level becomes too low, the phone turns off
automatically, and you can lose any unsaved
information.
With the Samsung-approved Li-Ion battery, you can
recharge the battery before it completely runs down.
The battery comes partially charged, but you should
fully charge the battery before using your phone. After
the first charge, you can use the phone while charging.
� Connect the charger to the USB/Accessory port,
then plug the Charger into an electrical outlet.
WARNING: Use only Samsung-approved batteries
and chargers with your device. The failure
to use a Samsung-approved battery and
charger may increase the risk that your
device will overheat, catch fire or explode,
resulting in serious bodily injury, death or
property damage.
1A. Setting Up Your Device 3